Wanzhoutong
ABS High-Impact Grey Filament 1.75mm
ABS High-Impact Grey Filament 1.75mm with heat deflection above 95°C and acetone-smoothable surface. Engineered for industrial jigs, fixtures, and enclosures where dimensional stability and impact resistance matter. CE compliant, low warp formulation for reliable large-format printing.
Highlights
- Heat deflection temperature above 95°C for functional industrial parts near heat sources
- Acetone vapor polishing produces smooth, sealed surfaces in minutes
- Low-warp compound reduces corner lifting on parts up to 250 mm
- CE compliant with material declaration for European buyers
- 1.75 mm diameter with ±0.05 mm tolerance fits Bowden and direct-drive extruders
- Tensile strength of 42 MPa for durable jigs and fixtures
- Bulk export available to Europe and Southeast Asia with FOB and CIF terms
- Compatible with Creality, Prusa, Bambu Lab, and common open-source printers
Specifications
| Material | ABS High-Impact |
|---|---|
| Diameter | 1.75 mm ± 0.05 mm |
| Spool Weight | 1 kg |
| Heat Deflection Temperature | > 95°C (0.45 MPa) |
| Tensile Strength | 42 MPa |
| Elongation at Break | 15% |
| Print Temperature | 230 – 260°C |
| Bed Temperature | 90 – 110°C |
| Density | 1.04 g/cm³ |
Product Detail
ABS HIGH-IMPACT GREY · 1.75MM · FACTORY-DIRECT FROM WANZHOUTONG
ABS 3D Printing Filament in high-impact grey, 1.75 mm diameter, extruded on 12 production lines with closed-loop diameter control holding ±0.05 mm tolerance throughout each spool. The modified ABS compound is formulated for functional parts - jigs, fixture templates, electronic enclosures - where heat resistance beyond what standard PLA offers is a working requirement, not a marketing claim.
HDT is above 95°C at 0.45 MPa per ASTM D648. Tensile strength reaches 42 MPa with 15% elongation at break, and density is 1.04 g/cm³. The modified compound reduces internal stress during cooling compared to standard ABS grades, which helps keep parts up to 250 mm flat on a heated bed at 90–110°C. Beyond 250 mm, an enclosure is recommended to block drafts. The ABS surface also dissolves in acetone vapor, removing visible layer lines and leaving a sealed finish - useful for enclosures that need to look molded rather than printed.
Print temperature range is 230–260°C. The filament has been tested on Creality, Prusa, and Bambu Lab printers with both Bowden and direct-drive extruders at 0.4 mm nozzle and 0.2 mm layer height. For buyers evaluating ABS 3D Printing Filament suppliers, the combination of heat deflection, impact modification, and diameter consistency on a 12-line extrusion floor is what separates a production-grade material from a repackaged consumer spool.
| Material | ABS High-Impact |
|---|---|
| Color | Grey |
| Diameter | 1.75 mm ± 0.05 mm |
| Spool Weight | 1 kg (2.2 lb) |
| Heat Deflection Temperature | > 95°C (0.45 MPa, ASTM D648) |
| Tensile Strength | 42 MPa |
| Elongation at Break | 15% |
| Density | 1.04 g/cm³ |
| Print Temperature Range | 230 – 260°C |
| Bed Temperature | 90 – 110°C |
| Compatible Printers | Creality, Prusa, Bambu Lab, common open-source FDM |
| Extruder Type | Bowden and direct-drive |
| Packaging | Vacuum-sealed with desiccant |
Why Buyers Choose This ABS 3D Printing Filament
Heat Resistance Above PLA
HDT above 95°C per ASTM D648. Parts hold dimensional stability near heat sources - motor mounts, ductwork, electronic housings - where PLA softens at 55–60°C.
Low-Warp Modified Compound
Impact-modified ABS reduces internal stress during cooling. Parts up to 250 mm stay flat on a 90–110°C heated bed without brims or rafts. An enclosure is recommended beyond 250 mm.
Acetone-Smoothable Surface
ABS dissolves in acetone vapor. A 10–30 minute bath removes layer lines and seals the surface - producing a molded look without sanding or filler primer.
±0.05 mm Diameter on 12 Extrusion Lines
Closed-loop laser micrometer control on every line. Consistent diameter means fewer extrusion skips, uniform wall width, and less rework on long unattended prints.
Applications
Manufacturing Jigs & Fixtures
Production-line alignment tools, gauges, and checking fixtures that need to survive shop-floor handling and occasional heat exposure.
Electronic Enclosures
Prototype housings for controllers, junction boxes, and sensor modules where HDT above 95°C keeps the enclosure rigid near warm components.
Functional Prototypes
Parts that get handled, dropped, assembled, and tested before tooling commitment. 42 MPa tensile strength holds up under mechanical evaluation.
Acetone-Finished Display Parts
Customer-facing prototypes and presentation models where a smooth, sealed surface matters more than print speed.
Not sure whether ABS is the right choice for your application? Our PLA vs PETG vs ABS vs TPU material selection guide breaks down the trade-offs in heat resistance, print difficulty, and mechanical properties side by side.
ABS 3D Printing Filament Wholesale: MOQ, Lead Time, and Export
Spool weight is 1 kg, vacuum-sealed with desiccant. Export carton packing is available for bulk orders to EU and Southeast Asia ports. MOQ is 50 kg per SKU. FOB or CIF shipping terms. For ABS 3D Printing Filament wholesale buyers managing multi-SKU inventory, mixed-pallet loading is available across our PLA, PETG, ABS, and TPU lines.
Lead Time
Standard products: 7–15 working days
TPU: 12–18 working days
Custom color: +3–7 working days
OEM packaging: confirmed by order
Shipping time: depends on destination
What is the MOQ and lead time for 1.75mm ABS 3D Printing Filament?
MOQ is 50 kg per SKU. See the Lead Time section above for current lead times. FOB or CIF. Mixed-pallet loading across filament types is available for wholesale buyers.
Is this ABS filament CE compliant?
CE compliance documentation is included with each shipment, along with a material declaration. RoHS and REACH reports can be provided on request - send your specific requirements and we will confirm what we can prepare.
Can you supply ABS 3D Printing Filament to Southeast Asia?
Yes. We export to Southeast Asia and Europe with FOB and CIF terms. For importers evaluating regional logistics, customs, and climate considerations, our Southeast Asia filament buying guide covers port selection, packaging for tropical humidity, and documentation requirements.
Recommended printer settings?
Nozzle 230–260°C, bed 90–110°C, PEI or glass surface. Outer wall 40–60 mm/s. Use an enclosure for parts exceeding 200 mm to prevent draft-induced warping.
Request a Sample or Bulk Quote
Send your target quantity, delivery port, and documentation requirements. We respond within 24 hours.
Request a Quote
